|
Do it yourself
| |||
| ||||
Where to Find and How to Replace the Cabin Filter of a Jeep Renegade
Model: Jeep Renegade
MK 1, BU, 520
- Years:
2014, 2015, 2016, 2017, 2018, 2019, 2020, 2021, 2022, 2023, 2024, 2025
Video tutorial
This guide shows how to replace the cabin filter of the Jeep Renegade. The first step is to remove the glove compartment and the side panel of the dashboard and unscrew the screws securing the drawer. Also unscrew the screws inside the glove compartment. Using a plastic trim tool, you can remove the glove compartment and expose the cabin filter housing. Unscrew the screws of the protective panel. On the top of the open compartment, there is a cover; once removed, you can replace the cabin filter by pulling it out. Be careful not to drop any debris and clean the compartment of any residue. At this point, you can install the new cabin air filter by inserting it into the housing; close the filter cover and reassemble the glove compartment following the same procedure as disassembly but in reverse.
Updated on 19 April 2026 by ScegliAuto
Related tutorials
Jeep Renegade
(2014-2026 /
MK 1, BU, 520)
Using a screwdriver, unscrew the securing screws of the glove compartment located under the dashboard. Remove the glove compartment using a lever (wh…
Jeep Renegade
(2014-2026 /
MK 1, BU, 520)
In the 2016 Jeep Renegade, the cabin air filter is located under the dashboard on the passenger side, behind the glove compartment. The position of t…
Jeep Renegade
(2014-2026 /
MK 1, BU, 520)
In this video, we will show you how to remove the cabin air filter from a Jeep Renegade. Pry off the plastic cover located on the right side of the d…
Other guides you may be interested in
|
How to reset the Service light on a 2019 Jeep Renegade?
The Service light, depicted as a yellow spanner, illuminates as scheduled to remind the driver that it is time for scheduled maintenance. This means that the set mileage has been reached, or the expected time has passed. The procedure involves turning on the instrument cluster, pressing the accelerator three times, and then turning off the ignition. After this, keep the brake pressed, turn the ignition back on, and then turn it off again. Upon the next ignition, you will notice that the light has been reset. by ScegliAuto More videos
|
|
For advertising on this site Write to info@scegliauto.com
ScegliAuto is not responsible for any inaccuracy of the data in the lists. To report any inaccuracy or your business (if you own the business in question), please write to info@scegliauto.com
Number of seconds to generate the page: 0.203
(c) ScegliAuto 2026 - info@scegliauto.com - Privacy policy VAT number: IT01247470535 |
