Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Resetting the Service Light on a Jeep Renegade

Model: Jeep Renegade - Years: 2014, 2015, 2016, 2017, 2018, 2019, 2020, 2021
Part: Service warning light

Video tutorial

First of all, do not perform the reset unless you have actually carried out the service, as failing to do so can lead to serious damage to the engine and other parts of the vehicle. First, get in the car and turn on the ignition (but not the engine!). Scroll through the various pages on the instrument panel until you reach the section regarding the regular service.

Once there, press the accelerator pedal three times, fully to the end of its travel. The service light will be reset and will disappear from the instrument panel.

Turn off the engine and restart it as a final check.


Updated on 15 May 2026 by ScegliAuto


Related tutorials

How to Reset the Service Light on a Jeep Renegade
How to Reset the Service Light on a Jeep Renegade
Jeep Renegade (2014-2026 / MK 1, BU, 520) Follow the necessary steps to reset the service light for the regular maintenance oil change on the Jeep Renegade. First, get inside the vehicle and …
Resetting the Service Light on the Jeep Renegade
Resetting the Service Light on the Jeep Renegade
Jeep Renegade (2014-2026 / MK 1, BU, 520) Today, see how to reset the service light for routine maintenance on the Jeep Renegade in simple steps. First, get inside the vehicle and connect you…
How to Reset the "Service" Light on a Jeep Renegade
How to Reset the "Service" Light on a Jeep Renegade
Jeep Renegade (2014-2026 / MK 1, BU, 520) Before you can begin, sit in the driver's seat of your Jeep Renegade. Start by pressing the vehicle's ignition button, which will turn on the instrum…

How to reset the Service light on a 2019 Jeep Renegade?

The Service light, depicted as a yellow spanner, illuminates as scheduled to remind the driver that it is time for scheduled maintenance. This means that the set mileage has been reached, or the expected time has passed. The procedure involves turning on the instrument cluster, pressing the accelerator three times, and then turning off the ignition. After this, keep the brake pressed, turn the ignition back on, and then turn it off again. Upon the next ignition, you will notice that the light has been reset.

Watch the video!


by ScegliAuto

More videos