Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Installing the Bonnet Deflector on a Jeep Renegade

Model: Jeep Renegade MK 1, BU, 520 - Years: 2014, 2015, 2016, 2017, 2018, 2019, 2020, 2021, 2022, 2023, 2024, 2025
Part: Body

Video tutorial

You can customise your vehicle by installing, among other things, a deflector on the front bonnet. These kits can be purchased online; let’s look at the installation steps in detail: take the deflector and position it on the front of the bonnet.

The deflector has four fixing holes, so mark the relative positions of the holes on the grille with tape. At this point, take the fixing clips that will be inserted along the edge of the bonnet once opened, positioning them according to the references marked earlier with tape.

Reposition the deflector and secure it with screws, ensuring the holes align with those of the clips underneath. Finally, attach the small covers over the screws.


Updated on 24 June 2026 by ScegliAuto


Related tutorials

Fitting Roof Bars on the Jeep Renegade
Fitting Roof Bars on the Jeep Renegade
Jeep Renegade (2014-2026 / MK 1, BU, 520) In this tutorial, learn how to install roof bars or roof racks on the Jeep Renegade in simple and quick steps. First, obtain the new kit of bars suit…
How to Replace the Battery in a Jeep Renegade?
How to Replace the Battery in a Jeep Renegade?
Jeep Renegade (2014-2021 / ) Removing and replacing the battery in a Jeep Renegade is a very simple and quick operation. Start by disconnecting the two terminals; for the negativ…
How to clean the nozzles of the front windshield wipers of the Jeep Renegade
How to clean the nozzles of the front windshield wipers of the Jeep Renegade
Jeep Renegade (2014-2026 / MK 1, BU, 520) Today we will explain how to clean the nozzles of the windshield wiper washers of the Jeep Renegade. To perform this operation, we need to open the f…

How to reset the Service light on a 2019 Jeep Renegade?

The Service light, depicted as a yellow spanner, illuminates as scheduled to remind the driver that it is time for scheduled maintenance. This means that the set mileage has been reached, or the expected time has passed. The procedure involves turning on the instrument cluster, pressing the accelerator three times, and then turning off the ignition. After this, keep the brake pressed, turn the ignition back on, and then turn it off again. Upon the next ignition, you will notice that the light has been reset.

Watch the video!


by ScegliAuto

More videos