Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Battery in a Jeep Renegade?

Model: Jeep Renegade - Years 2014-2021
Part: Battery

Removing and replacing the battery in a Jeep Renegade is a very simple and quick operation. Start by disconnecting the two terminals; for the negative, simply loosen the plastic clamp. For the positive terminal, remove the cover, loosen the 10 mm bolt shown in the video, and unscrew the two small screws that secure the plate. Finally, unscrew the 13 mm bolt located at the bottom left of the battery and pull it out of its housing. Fitting the replacement will be just as simple; just follow the same steps in reverse.

Updated on 21 May 2026 by ScegliAuto

Video tutorial

Related tutorials

How to replace the battery of the Jeep Renegade
How to replace the battery of the Jeep Renegade
Jeep Renegade (2014-2023 / ) Below are the step-by-step instructions on how to remove and replace the battery of the Jeep Renegade. First, open the hood of the vehicle and start …
How to Replace the Remote Battery in the Jeep Renegade
How to Replace the Remote Battery in the Jeep Renegade
Jeep Renegade (2014-2026 / 520, MK 1, BU) In today's video, see how to replace the battery in the remote for the Jeep Renegade. First, remove the metal key from the fob. Insert it into the se…
How to Replace the Battery in a Jeep Renegade?
How to Replace the Battery in a Jeep Renegade?
Jeep Renegade (2014-2021 / ) To replace the battery in a Jeep Renegade, open the bonnet to access the engine compartment: the battery is located inside, at the top right near the…

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos