Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Change the Rear Light on the Jeep Renegade?

Model: Jeep Renegade MK 1, BU, 520 - Years: 2014, 2015, 2016, 2017, 2018, 2019, 2020, 2021, 2022, 2023, 2024, 2025
Part: Tail light

Video tutorial

If you need to replace the rear light on the vehicle, follow these instructions for removal: first, open the tailgate and locate the light to be removed. Behind it, there is a plastic cover inside the boot that needs to be pried off. Underneath, there is a wing nut that can be unscrewed by hand.

This will free the light unit, which you can then push outwards to remove, taking care to disconnect the rear connectors. At this point, take the new light and position it in the housing, reattach the connector, and screw the wing nut back on.


Updated on 28 June 2026 by ScegliAuto


Related tutorials

Changing the Headlight Bulbs on a Jeep Renegade
Changing the Headlight Bulbs on a Jeep Renegade
Jeep Renegade (2014-2026 / MK 1, BU, 520) Do you want to change the headlight bulbs on a Jeep Renegade? Follow these steps. Open the bonnet by pulling the lever located at the bottom right of…
How to Replace the Rear Light Bulbs on a Jeep Renegade
How to Replace the Rear Light Bulbs on a Jeep Renegade
Jeep Renegade (2014-2026 / MK 1, BU, 520) Are the rear lights on your car not working anymore? Follow this guide to remove the light unit from a Jeep Renegade and replace the bulbs. Open the …
How to Replace the Rear Light on a Jeep Renegade
How to Replace the Rear Light on a Jeep Renegade
Jeep Renegade (2014-2026 / MK 1, BU, 520) How do you remove the rear light on a Jeep Renegade? Open the boot lid, unscrew the fastening screws located at the side of the light. Detach the rea…

How to reset the Service light on a 2019 Jeep Renegade?

The Service light, depicted as a yellow spanner, illuminates as scheduled to remind the driver that it is time for scheduled maintenance. This means that the set mileage has been reached, or the expected time has passed. The procedure involves turning on the instrument cluster, pressing the accelerator three times, and then turning off the ignition. After this, keep the brake pressed, turn the ignition back on, and then turn it off again. Upon the next ignition, you will notice that the light has been reset.

Watch the video!


by ScegliAuto

More videos