Do it yourself
Frequently asked questions about cars and motorcycles

How to Reset the Service Light on Jeep Renegade

Model: Jeep Renegade MK 1, BU, 520 - Years: 2014, 2015, 2016, 2017, 2018, 2019, 2020, 2021, 2022, 2023, 2024, 2025
Part: Service warning light

Video tutorial

If the service warning light appears on the instrument cluster display, it means it is time (either due to mileage or time elapsed) to perform maintenance, including at least an oil change and filter replacement: this maintenance can easily be done as a DIY task, provided you dispose of the waste properly at a specialised collection centre; once the regular maintenance is completed, you can proceed to reset the SERVICE light: this is a manual procedure that does not require any diagnostic tools and is performed using the accelerator pedal; therefore, turn on the ignition without starting the engine and within 10 seconds, press the accelerator pedal three times to the floor.


Updated on 18 February 2026 by ScegliAuto


Related tutorials

Jeep Renegade (2014-2026 / MK 1, BU, 520) Before you can begin, sit in the driver's seat of your Jeep Renegade. Start by activating the instrument cluster by turning the key in the ignition b…
Jeep Renegade (2014-2021 / ) In this short video tutorial, learn how to reset the maintenance light on a Jeep Renegade model from 2014 to 2021. First, turn on the ignition, then …
Jeep Renegade (2014-2026 / MK 1, BU, 520) Before you can begin, sit in the driver's seat of your Jeep Renegade. Start by pressing the vehicle's ignition button once, activating the instrument…

Other guides you may be interested in

How to reset the Service light on a 2019 Jeep Renegade?

The Service light, depicted as a yellow spanner, illuminates as scheduled to remind the driver that it is time for scheduled maintenance. This means that the set mileage has been reached, or the expected time has passed. The procedure involves turning on the instrument cluster, pressing the accelerator three times, and then turning off the ignition. After this, keep the brake pressed, turn the ignition back on, and then turn it off again. Upon the next ignition, you will notice that the light has been reset.

Watch the video!


by ScegliAuto

More videos