|
Do it yourself
| |||
| ||||
How to Reset the Tyre Pressure Warning Light on the Jeep Compass?
Model: Jeep Compass
552, MK 2
- Years:
2016, 2017, 2018, 2019, 2020, 2021, 2022, 2023, 2024, 2025
Video tutorial
To reset the tyre pressure warning light on the Jeep Compass, first inflate the tyres to the correct inflation pressure value, which is indicated on the sticker affixed to the driver's door pillar. Once the tyres are at that pressure, turn on the ignition to allow the sensors to detect the new pressure value. If the light does not turn off immediately, you may need to drive a few miles to give the sensors time to register the new values.
Updated on 3 September 2026 by ScegliAuto
Related tutorials
Jeep Compass
(2006-2016 /
MK 49, MK 1)
When the tyre pressure warning light illuminates on the Jeep Compass display along with an audible signal, it means that at least one of the four tyr…
Jeep Compass
(2016-2025 /
552, MK 2)
To reset the tyre pressure warning light on the Jeep Compass, first ensure the tyres are inflated to the correct pressure. This value is found on the…
Jeep Compass
(2006-2016 /
MK 49, MK 1)
On the instrument panel of the Jeep Compass, the tire pressure warning light can be reset by inflating the tires to the correct inflation pressure va…
Other guides you may be interested in |
How to Reset the AdBlue Warning Light on a Peugeot Boxer
To reset the AdBlue system on a 2018 Peugeot Boxer, follow these steps: Start the engine and ensure the vehicle is parked in a well-ventilated area. Locate the "MENU" button on the dashboard or steering wheel controls. Press and hold the "MENU" button until the menu options appear on the display. Use the arrow buttons or scroll wheel to access the "Vehicle Settings" or "Settings" menu. Select the "AdBlue" or "AdBlue System" option. Look for the "Recharge" or "Reset" option in the AdBlue menu. Once you find the reset option, select it and confirm your choice when prompted. The system will be reset, and a confirmation message may appear on the display. Turn off the engine and wait a few seconds. Restart the engine and check that the AdBlue system has been reset. by ScegliAuto More videos
|
For advertising on this site Write to info@scegliauto.com
ScegliAuto is not responsible for any inaccuracy of the data in the lists. To report any inaccuracy or your business (if you own the business in question), please write to info@scegliauto.com
Number of seconds to generate the page: 0.009
(c) ScegliAuto 2026 - info@scegliauto.com - Privacy policy VAT number: IT01247470535 |
