Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How do you reset the service light on a Jeep Renegade?

Model: Jeep Renegade 520, MK 1, BU - Years 2014-2026
Part: Service warning light

In this video we can see how to reset the service light of a Jeep Renegade: make sure all doors, hood, and trunk are closed; turn on the ignition and we will see the maintenance symbol displayed on the screen along with the service message. Now we must act quickly, because within ten seconds of turning on the ignition we must press and release the accelerator pedal three times. Once this is done, we can turn off the ignition and the service will be reset. To make sure, we should turn on the ignition again and possibly repeat the procedure.

Posted on 7 May 2024 by ScegliAuto

Video tutorial

Related tutorials

How do you reset the Service light of the Jeep Renegade?
How do you reset the Service light of the Jeep Renegade?
Jeep Renegade (2014-2026 / 520, MK 1, BU) To reset the Service light on the Jeep Renegade, you will need to turn on the instrument panel by turning the key inside the ignition switch. Once th…
How to Reset the Service Light on a Jeep Renegade
How to Reset the Service Light on a Jeep Renegade
Jeep Renegade (2014-2026 / 520, MK 1, BU) Follow the necessary steps to reset the service light for the regular maintenance oil change on the Jeep Renegade. First, get inside the vehicle and …
How to reset the maintenance interval of the Jeep Renegade
How to reset the maintenance interval of the Jeep Renegade
Jeep Renegade (2014-2026 / 520, MK 1, BU) Today's instructions will allow us to reset the service light and maintenance interval of the Jeep Renegade. First, we get into the car and start the…

    Frequently Asked Questions

    • Jeep Renegade 2014-2026 - Why did the oil change light come on in the Jeep Renegade? Read answer

How to Open a Stuck Boot on the Peugeot 407?

On the Peugeot 407, the boot may become stuck, possibly due to a problem with the control button or the lock actuator. In such cases, you can perform an emergency opening by following the simple procedure shown in this tutorial. First, open the rear doors, then lower the seat back by operating the release lever. Next, go inside the boot, locate the lock, and manually operate it using a flathead screwdriver. The boot will then be free to open.

Watch the video!


by ScegliAuto

More videos