Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to restore the service light on the Jeep Renegade

Model: Jeep Renegade 520, MK 1, BU - Years 2014-2026
Part: Service warning light

Welcome to this article where we will explain the procedure for resetting the oil change indicator light, or service indicator light, on the Jeep Renegade. To reset this indicator light, first start the instrument panel. After starting the instrument panel, press the accelerator pedal 3 times, wait 3 seconds, and restart the instrument panel. Now the procedure will be complete and the indicator light will be reset. We recommend performing this procedure only after having the car serviced at a workshop. As we have seen, the procedure takes less than 1 minute to complete and does not require any external tools or software.

Posted on 3 May 2025 by ScegliAuto

Video tutorial

Related tutorials

How to restore the service light on the Jeep Renegade
How to restore the service light on the Jeep Renegade
Jeep Renegade (2014-2026 / 520, MK 1, BU) Welcome to this article, where we will show you how to reset the service light of the Jeep Renegade. We recommend performing this procedure only if t…
How to reset the oil light on the Jeep Renegade
How to reset the oil light on the Jeep Renegade
Jeep Renegade (2014-2026 / 520, MK 1, BU) In this article, we show you how to reset the oil change light, or the service light, of the Jeep Renegade in case the reset is not performed by the …
How to Reset the Service Light on a Jeep Renegade
How to Reset the Service Light on a Jeep Renegade
Jeep Renegade (2014-2026 / 520, MK 1, BU) The procedure required to correctly complete the manual reset of the service light on your Jeep Renegade (2014-2022) is very simple and takes just a …

    Frequently Asked Questions

    • Jeep Renegade 2014-2026 - Why did the oil change light come on in the Jeep Renegade? Read answer

How to Open a Stuck Boot on the Peugeot 407?

On the Peugeot 407, the boot may become stuck, possibly due to a problem with the control button or the lock actuator. In such cases, you can perform an emergency opening by following the simple procedure shown in this tutorial. First, open the rear doors, then lower the seat back by operating the release lever. Next, go inside the boot, locate the lock, and manually operate it using a flathead screwdriver. The boot will then be free to open.

Watch the video!


by ScegliAuto

More videos