Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Model: Kawasaki J300
Part: Engine oil

In this tutorial we can see how to replace the engine oil in the Kawasaki J300 scooter, an extremely simple and quick operation. First of all, make sure that the engine is cool enough to operate safely, then place a container underneath the scooter, locate the drainage hole bolt and unscrew it using a socket wrench. Wait for all the oil to drain out of the system, open the filter cap and insert the replacement. At this point, all that remains is to reassemble everything and pour the necessary amount of oil through the designated upper hole.

Posted on 4 November 2025 by ScegliAuto

Video tutorial

Related tutorials

Resetting the Oil Service Light on Kawasaki J300
Resetting the Oil Service Light on Kawasaki J300
J300 After changing the engine oil on your Kawasaki J300, an operation to be performed every 3,100 miles, you must also reset the service light. In today’…
How do you replace the belt on the Kawasaki J300?
How do you replace the belt on the Kawasaki J300?
J300 To replace the belt of the Kawasaki J300, you need to loosen the screws that secure the cover located near the rear wheel, on the left side of the mo…
How to remove the shield and the windshield of the Kawasaki J300
How to remove the shield and the windshield of the Kawasaki J300
J300 In this video we can see how to dismantle the windshield and the shield of the Kawasaki J300: we remove the plugs from both sides of the windshield i…

How do you replace the headlight bulb of the Sym Citycom 300?

In order to replace the headlight bulb of the Sym Citycom 300, you need to loosen the screws that secure the panels located at the front of the motorcycle fairing: once the fastening screws of these panels have been loosened, you can unscrew those on the inside of the front fairing, so that the latter can be removed from its seat. Now it will be possible to proceed by unscrewing the screws that secure the corresponding headlight, disconnecting its connector and removing the bulb inside; in this way you can reinstall the removed panels.

Watch the video!


by ScegliAuto

More videos