Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to replace the headlight bulb on the Kawasaki Vulcan S?

Model: Kawasaki Vulcan S
Part: Headlight bulb

Video tutorial

In this tutorial, we will see how to replace the headlight bulb on the Kawasaki Vulcan S, a very simple and quick operation. First, let's make sure that the key is not inserted, then locate the two screws positioned underneath the headlight and unscrew them with a hex key. Next, grasp the headlight, gently pull it towards us, and separate it from the support.

At this point, we can disconnect the power connector, remove the rubber cap, unclip the metal clip, and extract the old bulb. To install the replacement and reassemble everything, simply follow the reverse procedure.


Posted on 30 November 2025 by ScegliAuto


Related tutorials

How to Replace the Front Headlamp Bulb on a Kawasaki Vulcan S?
How to Replace the Front Headlamp Bulb on a Kawasaki Vulcan S?
Vulcan S In this tutorial, you will learn how to replace the front headlamp bulb on a Kawasaki Vulcan S, a very simple and quick operation. First, ensure that…
How to Replace the Front Headlight Bulb in the Kawasaki Vulcan S?
How to Replace the Front Headlight Bulb in the Kawasaki Vulcan S?
Vulcan S In this tutorial, you will see how to replace the front headlight bulb in the Kawasaki Vulcan S, an extremely simple and quick operation. First, ensu…
How to Replace the Front Headlamp Bulb on a Kawasaki Vulcan S?
How to Replace the Front Headlamp Bulb on a Kawasaki Vulcan S?
Vulcan S To replace the front headlamp bulb on the Kawasaki Vulcan S, loosen the screws that secure the headlamp unit to its housing: these screws are located…

How to Set the Time on a Kymco DTX360?

To set the time on a Kymco DTX360, follow these steps. First, turn on the scooter and ensure it is in time display mode on the dashboard. Once you find this mode, press and hold the button for setting the time, located on the scooter's handlebars. After a few seconds, the display will start to flash, indicating that you can now adjust the time. Use the adjustment buttons to increase or decrease the hour until you reach the desired time. When you have set the correct time, press the time setting button again to confirm your selection. The display will stop flashing and the time will be set correctly. Be sure to consult the owner's manual for specific instructions for your Kymco DTX360 model, as the procedure may vary slightly.

Watch the video!


by ScegliAuto

More videos