Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Front Headlamp Bulb on a Kawasaki Vulcan S?

Model: Kawasaki Vulcan S
Part: Headlight bulb

Video tutorial

In this tutorial, you will learn how to replace the front headlamp bulb on a Kawasaki Vulcan S, a very simple and quick operation. First, ensure that the key is not inserted.

Then, position yourself in front of the headlamp, locate the two lower screws, and undo them using a 5mm hex spanner. Next, separate the headlamp from the base, disconnect the power connector, remove the rubber cover, and unclip the metal clip.

At this point, you can extract the old bulb, insert the replacement, and reassemble everything by following the reverse procedure.


Updated on 30 October 2026 by ScegliAuto


Related tutorials

How to Replace the Front Headlight Bulb in the Kawasaki Vulcan S?
How to Replace the Front Headlight Bulb in the Kawasaki Vulcan S?
Vulcan S In this tutorial, you will see how to replace the front headlight bulb in the Kawasaki Vulcan S, an extremely simple and quick operation. First, ensu…
How to Replace the Front Headlamp Bulb on a Kawasaki Vulcan S?
How to Replace the Front Headlamp Bulb on a Kawasaki Vulcan S?
Vulcan S To replace the front headlamp bulb on the Kawasaki Vulcan S, loosen the screws that secure the headlamp unit to its housing: these screws are located…
How to replace the headlight bulb on the Kawasaki Vulcan S?
How to replace the headlight bulb on the Kawasaki Vulcan S?
Vulcan S In this tutorial, we will see how to replace the headlight bulb on the Kawasaki Vulcan S, a very simple and quick operation. First, let's make sure t…

How to change the engine oil of a Kawasaki KX450?

To change the engine oil of the Kawasaki KX450, start by placing the bike on a stable stand. Remove the oil filler cap and the drain plug on the engine casing to allow the old oil to drain completely. Once emptied, replace the drain plug and remove the oil filter using a suitable spanner. Replace the filter with a new one, ensuring to apply a bit of oil to the edge of the gasket. Add new engine oil, checking the level with the dipstick. Remove any excess oil if necessary and replace the filler cap.

Watch the video!


by ScegliAuto

More videos