Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to set the time on the Kawasaki Versys?

Model: Kawasaki Versys
Part: Clock

Video tutorial

In this tutorial, we will see how to adjust the time on the Kawasaki Versys, a very simple and quick operation to perform, for example, after disconnecting the battery or when switching to daylight saving time. First, we insert the key, then we turn on the instrument panel and hold down both dashboard buttons until the clock starts to blink.

Next, we press the lower button to adjust the hour using the upper button, and then, using the lower button again, we move on to the minutes. To save the setting, simply hold down both buttons one last time.


Posted on 29 December 2025 by ScegliAuto


Related tutorials

Battery Replacement on Kawasaki Versys 650
Battery Replacement on Kawasaki Versys 650
Versys Insert the ignition key into the designated slot on the side fairing, then remove the seat from the motorcycle. There you go! This operation will hel…
How to Remove the Side Panels of the Kawasaki Versys 650?
How to Remove the Side Panels of the Kawasaki Versys 650?
Versys To remove the side panels of the Kawasaki Versys fairing, loosen the bolts located at the top of the panel, just below the grips. These are 4 mm scre…
How to change the engine oil on the Kawasaki Versys?
How to change the engine oil on the Kawasaki Versys?
Versys To change the engine oil on the Kawasaki Versys, loosen the oil drain plug located at the bottom of the bike. Once opened, collect the used oil in an…

How to Remove the Front Wheel of the Ducati Multistrada

The procedure for removing and replacing the front wheel or tyre of the Ducati Multistrada is quite simple. First, place the motorcycle on the centre stand and begin loosening the central axle of the front wheel; then unscrew all the bolts securing the brake calipers to remove them from the discs, as shown in the video. At this point, lift the wheel with the appropriate stand to remove the front wheel, replacing the tyre if necessary; then refit the wheel and all components, following the video tutorial to the end!

Watch the video!


by ScegliAuto

More videos