Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Model: Kawasaki Z800
Part: Engine oil

Watch this guide video to learn how to replace the oil and filter on a Kawasaki Z800. Position the bike on its side stand (if you do not have a centre stand), unscrew the oil filler cap; using a socket spanner, unscrew the bolt from the oil sump (drain the fluid into a container). Unscrew the oil cartridge filter with a strap wrench. Remove the worn oil filter and install a new one. Finally, top up the new fluid in the engine using a funnel and replace the cap. Check the oil level with the transparent indicator.

Updated on 8 March 2026 by ScegliAuto

This video is currently unavailable

Related tutorials

How to replace the engine oil in the Kawasaki Z800?
How to replace the engine oil in the Kawasaki Z800?
Z800 In this tutorial, we will see how to replace the engine oil in the Kawasaki Z800, a very simple and quick operation. First, ensure that the engine is…
How to Perform a Service on a Kawasaki Z800
How to Perform a Service on a Kawasaki Z800
Z800 Engine oil and the oil filter must be replaced at regular intervals to ensure the engine operates correctly. Here’s how to perform a service on the K…
How to Change the Engine Oil in a Kawasaki Z800?
How to Change the Engine Oil in a Kawasaki Z800?
Z800 In this tutorial, see how to change the engine oil in a Kawasaki Z800, a very simple and quick operation. First, ensure the engine is cool enough to …

Guide to replacing the starter motor of the Piaggio Vespa ET4 150

Today's guide will show us how to disassemble and replace the starter motor of the Piaggio Vespa ET4 150 scooter, in simple steps. First, we put the scooter on the center stand and lift the seat; we remove the battery, disconnecting both terminals, and then remove the compartment under the seat, as shown in the video. At this point, we disconnect the intake hose to access the starter motor, unscrewing its fastening screws and disconnecting the wiring to remove it; all that's left is to replace it with the new original one, applying the reverse procedure!

Watch the video!


by ScegliAuto

More videos