Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions
Like cars, motorcycles, such as the one in this video, have their maintenance schedule, which is essential to preserve the life and efficiency of the motorcycle. The service light reminds us of the maintenance deadlines, so you will need to carry out the oil change, oil filter, spark plugs, brake fluid, and more. After completing these, proceed as described below to reset the light: turn on the instrument panel, press and hold the left and right indicator buttons on the left side of the handlebars, access the Service, select and enable the cancellation operation, and finally wait for completion.

Posted on 5 February 2026 by ScegliAuto

Video tutorial

Related tutorials

How to reset the service indicator light on the Kawasaki Versys 1000
How to reset the service indicator light on the Kawasaki Versys 1000
Versys 1000 The reset of the service light of the Moto Kawasaki Versys 1000 is a very simple operation that can be done independently, thanks also to our short v…
How is the service reset of the Kawasaki Versys 1000 performed?
How is the service reset of the Kawasaki Versys 1000 performed?
Versys 1000 The service indicator programming is used to not forget the moment when it is necessary to service, change oil and engine filter of our motorcycle, i…
How to Access the Settings Menu on the Kawasaki Versys 1000
How to Access the Settings Menu on the Kawasaki Versys 1000
Versys 1000 To access the settings menu on the Kawasaki Versys onboard computer, turn on the motorcycle and press the SET button located on the handlebars. Use t…

How to Replace the Tyres on the Husaberg FE 450

In this guide, follow the instructions to remove and replace the tyres on the Husaberg FE 450 enduro bike. First, place the bike on a stand and lift the wheel off the ground; then, undo the bolts securing the brake caliper to remove it, as shown in the video. Next, unscrew the central axle of the wheel, removing the tyre from the rim (deflating it and using levers); then install the new tyre, ensuring it has the correct dimensions, following the video tutorial to the end!

Watch the video!


by ScegliAuto

More videos