Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to change the engine oil in the Kawasaki W800?

Model: Kawasaki W800
Part: Engine oil

Video tutorial

In this tutorial, you will see how to change the engine oil in the Kawasaki W800, a very simple and quick operation. First, ensure that the engine is cool enough to operate safely, then place a container underneath the bike, locate the drain hole bolt, and unscrew it using a 17mm socket.

Allow all the oil in the system to drain out, remove the filter cover with an 8mm socket, and unscrew the filter. At this point, simply tighten the replacement, reassemble everything, and add the required amount of oil through the designated top hole.


Posted on 4 August 2026 by ScegliAuto


Related tutorials

How to Change the Engine Oil in a Kawasaki W800?
How to Change the Engine Oil in a Kawasaki W800?
W800 Changing the engine oil in a Kawasaki W800, as shown in this tutorial, is a very simple and quick operation. First, ensure the engine is cool enough,…
How to replace the motor oil in the Kawasaki W800?
How to replace the motor oil in the Kawasaki W800?
W800 In this tutorial we can see how to replace the engine oil in the Kawasaki W800, a very simple and quick operation. First of all, we wait for the engi…
How to Replace the Headlight Bulb on the Kawasaki W800
How to Replace the Headlight Bulb on the Kawasaki W800
W800 To replace the headlight bulb on the Kawasaki W800, loosen the screws that secure the lens of the optical unit to its housing. These screws will be l…
ScegliAuto offers an extensive international collection of automotive tutorials available in 12 languages. Each guide combines instructional videos with original explanations written by experienced human editors, along with information about the car models covered.

How to calibrate the oil pump on a Gilera Runner?

To calibrate the oil pump on a Gilera Runner, you need to loosen the screws securing the cover near the rear wheel on the left side of the bike. Once these screws are removed, you can detach the cover and identify the underlying components. Below the crankshaft pulley, you will find the pump, which can be adjusted using the gauge to the left of the cover: you need to screw it in until the two marks on the pump and next to it align. Once the pump is adjusted, you can fully close the cover with the bolts.

Watch the video!


by ScegliAuto

More videos