Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions
In order to replace the headlight bulb of the Kawasaki W800, you need to loosen the screws that hold the lens of the optical group to its housing: these screws will be located at the bottom of the corresponding headlight. Once the headlight is open, you can remove the bulb inside by disconnecting the appropriate connector. After the old bulb has been removed, you can connect the new one by inserting it into the optical group. After the replacement, you can close the headlight, checking that everything works correctly.

Posted on 4 June 2024 by ScegliAuto

Video tutorial

Related tutorials

How to replace the engine oil in the Kawasaki W800?
How to replace the engine oil in the Kawasaki W800?
W800 Replacing the motor oil in the Kawasaki W800, as we can see in this tutorial, is an extremely simple and fast operation. First of all, make sure that…
How to replace the motor oil in the Kawasaki W800?
How to replace the motor oil in the Kawasaki W800?
W800 In this tutorial we can see how to replace the engine oil in the Kawasaki W800, a very simple and quick operation. First of all, we wait for the engi…
How to Set the Time on a Kawasaki W800 Cafe
How to Set the Time on a Kawasaki W800 Cafe
W800 In this tutorial, you will see how to set the time on a Kawasaki W800 Cafe, a very simple and quick operation to perform, for example, after disconne…

Guide to replacing the starter motor of the Piaggio Vespa ET4 150

Today's guide will show us how to disassemble and replace the starter motor of the Piaggio Vespa ET4 150 scooter, in simple steps. First, we put the scooter on the center stand and lift the seat; we remove the battery, disconnecting both terminals, and then remove the compartment under the seat, as shown in the video. At this point, we disconnect the intake hose to access the starter motor, unscrewing its fastening screws and disconnecting the wiring to remove it; all that's left is to replace it with the new original one, applying the reverse procedure!

Watch the video!


by ScegliAuto

More videos