Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions
In this tutorial, you will see how to change the engine oil on a Kawasaki ZX-14R, a very simple and quick operation. First, ensure that the engine is cool enough to operate safely, then position a container underneath the bike, locate the drain hole bolt, and unscrew it using a socket spanner. Allow all the oil in the system to drain out, unscrew the old filter, and tighten both the replacement filter and the bolt. At this point, simply pour the necessary amount of oil through the designated upper hole.

Posted on 17 August 2026 by ScegliAuto

Video tutorial

Related tutorials

How do you replace the motor oil in the Kawasaki ZX-14R?
How do you replace the motor oil in the Kawasaki ZX-14R?
Zx 14r The oil change of the Kawasaki ZX-14R can be done by loosening the drain plug located in the central lower part of the motorcycle: once the plug is r…
Battery Replacement on Kawasaki ZX 14R
Battery Replacement on Kawasaki ZX 14R
Zx 14r Replacing the battery on a Kawasaki ZX 14R is very simple, and now you will see how. To access it, remove the small left side fairing as indicated in…
How do you replace the clutch of the Kawasaki ZX-14R?
How do you replace the clutch of the Kawasaki ZX-14R?
Zx 14r It will be possible to replace the clutch of the Kawasaki ZX-14R by loosening the screws that secure the cover of the component located in the lower …

How to change the engine oil in a Harley Davidson Road Glide?

To change the engine oil in a Harley Davidson Road Glide, follow these steps. First, ensure the engine is warm but not too hot. Lift the bike on a central or side stand to ensure a stable position. Locate the oil drain plug and the oil fill cap on the engine. Remove the oil fill cap to allow the old oil to drain more easily. Then, place a collection container under the oil drain plug. Remove the oil drain plug and let the old oil drain completely. Once draining is complete, replace the oil drain plug and tighten it securely. Then, fill the engine with new oil through the fill cap to the recommended level. Ensure you use high-quality engine oil recommended by the manufacturer. Check the oil level using the dipstick and add oil if necessary. Finally, start the engine and let it run for a few minutes to allow the oil to circulate properly. Check the oil level again and add if necessary. Make sure to dispose of the used oil properly at an authorised collection centre.

Watch the video!


by ScegliAuto

More videos