Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Motorcycles
    2. :
  2. Kawasaki
    3. :
  3. Z750
    4. : Oil change and engine filter on Kawasaki Z750

Model: Kawasaki Z750
Part: Engine oil
Oil change and engine filter on Kawasaki Z750

After placing a tray under the oil filter compartment, unscrew both the filling and drain plugs and let the used oil drain, collecting it in the tray itself. The filler cap must be removed to avoid vacuum and facilitate the escape of the lubricant. For the same purpose, it is advisable to start the engine beforehand for a couple of minutes. As shown in the video, unscrew the filter with the appropriate key. Before screwing in the new filter, it is important to remember to lubricate the o-r, even with used oil it is just fine. Close the drain hole and insert the new lubricant from the filler one.


Posted on 26 December 2023 by ScegliAuto

How do you bleed the Gilera Nexus 500 brakes?

In order to bleed the Gilera Nexus 500 brakes, you need to open the drawer that is located in correspondence with the knob, unscrewing the fixing screws of the cover. Once this has been opened, it will be possible to insert a small tube inside the vent on the brake caliper: therefore, by opening the valve, the brake fluid can be collected inside a container. When all the fluid has flowed out, it will be possible to fill in the new brake oil from the vent that was previously opened by removing the cover next to the knob.

Watch the video!


by ScegliAuto

More videos