Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replacing Rear Brake Pads on a Kawasaki Ninja 250sl

Model: Kawasaki Ninja 250
Part: Brake pads

This video is currently unavailable

Unscrew the bolts securing the rear brake caliper. As they can be quite tight, use a small tube to leverage the Allen key if possible; otherwise, they will be difficult to remove.

Once done, pull the caliper off the disc and remove the pads from the caliper, possibly using a small flat screwdriver for assistance. While you’re at it, clean the entire braking area.

The new pads will obviously be much thicker than the ones removed, so if you cannot fit them into the caliper, widen their seats with a flat screwdriver. Refit the caliper.


Updated on 10 April 2026 by ScegliAuto


Related tutorials

How to Replace the Front Brake Pads on a Kawasaki Ninja 250
How to Replace the Front Brake Pads on a Kawasaki Ninja 250
Ninja 250 In today's video tutorial, learn how to replace the front brake pads on a Kawasaki Ninja 250 in simple and quick steps. First, move to the front whee…
How to Replace the Brake Pads on the Kawasaki Ninja 250?
Ninja 250 To replace the brake pads on the Kawasaki Ninja 250, perform the same operation for both the front and rear wheels. In both cases, unscrew the bolt t…
How to Replace the Spark Plug on a Kawasaki Ninja 250?
How to Replace the Spark Plug on a Kawasaki Ninja 250?
Ninja 250 Good morning, today you will replace the spark plug on your Kawasaki Ninja 250. Start by removing the side fairings of the bike. Next, disconnect the…

How to Replace the Air Filter on a Honda SH 300i Scooter?

In this tutorial, you will see how to replace the air filter on a Honda SH 300i scooter, a very simple and quick operation. Before proceeding, ensure the engine is completely cold for safety. Start by unscrewing both the 6 screws around the perimeter of the airbox and the 3 bolts of the circular cover, then remove the cover and unscrew the additional screw that has just been freed. Next, separate the box, remove the old filter, and clean the housing of any dirt residue. Finally, follow the reverse procedure to install the replacement.

Watch the video!


by ScegliAuto

More videos