Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Spark Plug on a Kawasaki Ninja 250?

Model: Kawasaki Ninja 250
Part: Spark plugs

Video tutorial

Good morning, today you will replace the spark plug on your Kawasaki Ninja 250. Start by removing the side fairings of the bike. Next, disconnect the cable that connects the spark plug to the coil by gently pulling it. At this point, use the appropriate spanner to unscrew the spark plug from the cylinder head.

Once this step is completed, you can remove the spark plug. To install the new spark plug, simply follow these same steps in reverse order, successfully completing the replacement.


Updated on 16 September 2026 by ScegliAuto


Related tutorials

How to Replace the Spark Plugs on a Kawasaki Ninja 250
How to Replace the Spark Plugs on a Kawasaki Ninja 250
Ninja 250 Today, you will learn how to remove and replace the spark plugs on a Kawasaki Ninja 250. After removing the seat and the fuel tank by unscrewing all …
How to Replace the Battery on the Kawasaki Ninja 250?
How to Replace the Battery on the Kawasaki Ninja 250?
Ninja 250 To replace the battery on the Kawasaki Ninja 250, loosen the screws located on the sides of the seat and remove the seat. Once the seat is removed, y…
How to Change the Engine Oil in a Kawasaki Ninja 250?
Ninja 250 In this tutorial, you will learn how to change the engine oil in a Kawasaki Ninja 250, a very simple and quick task. First, wait until the engine is …

How to Change the Engine Oil of a BMW R9T

To change the engine oil of a BMW R9T, follow these steps. Ensure the engine is warm but not too hot. Position the bike on a flat surface and lift the front using a motorcycle stand. Remove the oil cap from the engine oil reservoir. Place a catch container under the oil drain plug, usually located on the underside of the engine. Unscrew the oil drain plug and let the old oil drain completely into the container. Once drained, re-tighten the oil drain plug. Remove the oil filter using an oil filter wrench. Clean the mounting surface of the filter and apply a bit of new oil to the seal of the new filter. Install the new oil filter. At this point, fill the engine with new oil, and you will have completed the replacement.

Watch the video!


by ScegliAuto

More videos