Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Change the Engine Oil in a Kawasaki Ninja 250?

Model: Kawasaki Ninja 250
Part: Engine oil

This video is currently unavailable

In this tutorial, you will learn how to change the engine oil in a Kawasaki Ninja 250, a very simple and quick task. First, wait until the engine is cool enough.

Then, position a container underneath the bike, locate the drain bolt, and undo it using a 17mm socket. Allow all the oil to drain from the engine, then open the filter housing and insert the new filter.

Finally, tighten the bolt and pour in the required amount of oil through the designated hole.


Updated on 27 September 2026 by ScegliAuto


Related tutorials

How to Change the Engine Oil in a Kawasaki Ninja?
How to Change the Engine Oil in a Kawasaki Ninja?
Ninja 250 .. In this tutorial, see how to change the engine oil in a Kawasaki Ninja 250, a very simple and quick operation. First, ensure.. …
How to Replace the Brake Light Bulb on a Kawasaki Ninja 250?
Ninja 250 Replacing the brake light bulb on a Kawasaki Ninja 250 is an extremely simple and quick task. First, ensure the key is not in the ignition for safety…
How to replace the battery in the Kawasaki Ninja 250?
How to replace the battery in the Kawasaki Ninja 250?
Ninja 250 In this tutorial we can see how to replace the battery in the Kawasaki Ninja 250, an extremely simple and quick operation. First of all, make sure th…

How to Change the Engine Oil of a BMW R9T

To change the engine oil of a BMW R9T, follow these steps. Ensure the engine is warm but not too hot. Position the bike on a flat surface and lift the front using a motorcycle stand. Remove the oil cap from the engine oil reservoir. Place a catch container under the oil drain plug, usually located on the underside of the engine. Unscrew the oil drain plug and let the old oil drain completely into the container. Once drained, re-tighten the oil drain plug. Remove the oil filter using an oil filter wrench. Clean the mounting surface of the filter and apply a bit of new oil to the seal of the new filter. Install the new oil filter. At this point, fill the engine with new oil, and you will have completed the replacement.

Watch the video!


by ScegliAuto

More videos