Do it yourself
Frequently asked questions about cars and motorcycles
In this tutorial, see how to change the engine oil in a Kawasaki Ninja 250, a very simple and quick operation. First, ensure the engine is completely cold for safety, then position a container underneath and, using a 17mm socket, unscrew the drain bolt. Once done, open the filter housing cap with the same socket, remove the old filter, and insert the replacement. At this point, reassemble everything and pour in new oil through the designated upper hole.

Updated on 12 July 2026 by ScegliAuto

Video tutorial

Related tutorials

Ninja 250 In this tutorial, we can see how to replace the motor oil in the Kawasaki Ninja 250, an extremely simple and quick operation. First of all, we wait f…
Ninja 250 To change the engine oil of the Kawasaki Ninja 250R, loosen the drain plug located at the bottom of the bike, in the central area. Once the plug is r…
Ninja 250 In this tutorial, you will see how to remove the starter motor on a Kawasaki Ninja 250, a very simple and quick operation. Before proceeding, ensure …

How to Reset the Service Light on the Yamaha Xmax 250?

To reset the service light on the Yamaha Xmax 250, you need to insert the ignition key into the appropriate slot, so that you can turn it and switch on the instrument panel. Once this is done, press and hold the central button located on the left side of the instrument panel: the button should be held for about 20 seconds. When released, you will notice that the flashing service light has turned off: to verify that the reset has occurred correctly, you will need to switch off and then switch on the vehicle's instrument panel.

Watch the video!


by ScegliAuto

More videos