Do it yourself
| ||||
|
Model: Kawasaki Ninja Zx 6r
Using a 4 mm Allen wrench, unscrew the bolt of the black plastic side shown in the video and let it come out of its seat, then unscrew the screw under the saddle. Obviously, each operation must be repeated on the other side of the bike and after that you can remove the saddle. Now disconnect the battery starting from the negative pole. Lower and remove the front bulkhead located behind the front wheel (one bolt per side). To remove the side fairings you have to unscrew four bolts, three front and one rear. At this point you can also remove the front fairings by turning the handlebar for better access.
Posted on 2 April 2024 by ScegliAuto
|
How do you replace the clutch cable of the LML Star?In order to replace the clutch cable of the LML Star you have to unscrew the screws that fix the front fairing of the bike, so that it can be removed: here it will be possible to find one of the ends of the cable, which will be connected to the relative lever. By unscrewing the bolt that connects the lever to the cable, it will be possible to detach the first end; the other end will be directly connected to the clutch. Once both ends have been disconnected, the cable can be pulled out and replaced with a new spare part. by ScegliAuto More videos
|
For advertising on this site Write to info@scegliauto.com
ScegliAuto is not responsible for any inaccuracy of the data in the lists. To report any inaccuracy or your business (if you own the business in question), please write to info@scegliauto.com
Number of seconds to generate the page: 0.006
(c) ScegliAuto 2024 - info@scegliauto.com - Privacy Policy VAT number: IT01247470535 |