Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Clutch Cable on the Kawasaki Ninja 250R

Model: Kawasaki Ninja 250

Video tutorial

In this video tutorial, you will learn how to remove and replace the clutch cable on the 2009 Kawasaki Ninja 250R in simple and quick steps. First, remove the side fairing on the clutch cover side; to do this, undo all the fastening screws.

Next, loosen the adjuster nut to release the clutch cable; now you can pull it from the lever using pliers. Finally, replace it with a new one, lubricating it well and inserting it correctly onto the lever; then make the adjustments on the two cable adjusters!


Updated on 9 May 2026 by ScegliAuto


Related tutorials

How to Replace the Front Mudguard of the Kawasaki Ninja 250R?
Ninja 250 To replace the front mudguard of the Kawasaki Ninja 250R, loosen the screws that secure the mudguard laterally at the front fork. Once these screws a…
How to Change the Engine Oil of the Kawasaki Ninja 250R?
How to Change the Engine Oil of the Kawasaki Ninja 250R?
Ninja 250 To change the engine oil of the Kawasaki Ninja 250R, loosen the drain plug located at the bottom of the bike, in the central area. Once the plug is r…
How to Replace the Exhaust on a Kawasaki Ninja 250R?
How to Replace the Exhaust on a Kawasaki Ninja 250R?
Ninja 250 To replace the exhaust on the Kawasaki Ninja 250R, first loosen the bolts securing the right side panel of the bike, located at the bottom where the …

How to Change the Engine Oil of a BMW R9T

To change the engine oil of a BMW R9T, follow these steps. Ensure the engine is warm but not too hot. Position the bike on a flat surface and lift the front using a motorcycle stand. Remove the oil cap from the engine oil reservoir. Place a catch container under the oil drain plug, usually located on the underside of the engine. Unscrew the oil drain plug and let the old oil drain completely into the container. Once drained, re-tighten the oil drain plug. Remove the oil filter using an oil filter wrench. Clean the mounting surface of the filter and apply a bit of new oil to the seal of the new filter. Install the new oil filter. At this point, fill the engine with new oil, and you will have completed the replacement.

Watch the video!


by ScegliAuto

More videos