Do it yourself
Frequently asked questions about cars and motorcycles
To replace the exhaust on the Kawasaki Ninja 250R, first loosen the bolts securing the right side panel of the bike, located at the bottom where the exhaust is connected. Once the panel is removed, you can loosen the bolt that secures the connection ring between the exhaust and the remaining part of the exhaust pipe. After loosening the bolt that secures the exhaust to the upper support, you can remove the old exhaust, install a new replacement part, and reassemble all removed components.

Updated on 13 June 2026 by ScegliAuto

Video tutorial

Related tutorials

Ninja 250 To replace the front mudguard of the Kawasaki Ninja 250R, loosen the screws that secure the mudguard laterally at the front fork. Once these screws a…
Ninja 250 To change the engine oil of the Kawasaki Ninja 250R, loosen the drain plug located at the bottom of the bike, in the central area. Once the plug is r…
Ninja 250 In this video tutorial, you will learn how to remove and replace the clutch cable on the 2009 Kawasaki Ninja 250R in simple and quick steps. First, r…

How to Replace the Battery in a Yamaha FZ6?

Replacing the battery in the Yamaha FZ6, as shown in this tutorial, is a very simple and quick operation. First, ensure that the key is not inserted, then remove the rider's seat and, using a 10mm socket spanner, loosen the bolt on the tank hinge. Next, unscrew both the front bolts and the fairing mounting bolts, lift the entire tank, and disconnect both terminals starting with the negative. At this point, you can remove the upper plastic plate, take the battery out of its housing, and fit the replacement.

Watch the video!


by ScegliAuto

More videos