Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Motorcycles
    2. :
  2. Kawasaki
    3. :
  3. Ninja 300
    4. : How to replace the brake and clutch levers on the Kawasaki Ninja 300

Model: Kawasaki Ninja 300
Part:
How to replace the brake and clutch levers on the Kawasaki Ninja 300

Let's see in this short guide, how to disassemble and replace the brake and clutch levers of the Kawasaki Ninja 300 motorcycle. First of all, let's disassemble the front brake lever, using a star wrench and a socket wrench; once the pin is removed we can remove and replace the lever with the new one, as shown in the video. At this point we are going to carry out the same operation for the clutch lever, disconnecting the cable; then we finally carry out the adjustment of the clutch, but also of the stroke of the brake lever, following the video tutorial to the end!


Posted on 13 July 2022 by ScegliAuto

How do you bleed the Gilera Nexus 500 brakes?

In order to bleed the Gilera Nexus 500 brakes, you need to open the drawer that is located in correspondence with the knob, unscrewing the fixing screws of the cover. Once this has been opened, it will be possible to insert a small tube inside the vent on the brake caliper: therefore, by opening the valve, the brake fluid can be collected inside a container. When all the fluid has flowed out, it will be possible to fill in the new brake oil from the vent that was previously opened by removing the cover next to the knob.

Watch the video!


by ScegliAuto

More videos