Do it yourself
Frequently asked questions about cars and motorcycles
To replace the exhaust on the Kawasaki Z650, loosen the bolts securing it to the corresponding supports located on the right side of the bike near the rear swingarm. Once the support bolts are loosened, proceed to remove the ring that frees the exhaust from the remaining part of the exhaust pipe. This way, the old exhaust can be detached from its housing, allowing you to insert the new one. After positioning the new exhaust, secure it with the appropriate bolts and check its operation.

Updated on 23 August 2026 by ScegliAuto

Video tutorial

Related tutorials

Z 650 To replace the exhaust on a Kawasaki Z650, loosen the screws that secure it to the corresponding supports located on the right side of the bike near …
Z 650 In this video we can see how to set the time on the instrument panel of a Kawasaki Z650. We use the two buttons located on the left of the instrument…
Z 650 Today, let's go over the instructions on how to replace the engine coolant in the Kawasaki Z 650 motorcycle. First, we place the motorcycle on a stan…

How to Change the Engine Oil in an Aprilia RS 660?

In this tutorial, we will see how to change the engine oil in an Aprilia RS 660, a very simple operation to be done every 12 months. First, ensure that the engine is completely cold, then remove the screws securing the lower fairing and take it off. Next, place a container underneath the bike, unscrew the drain bolt with an 8 mm hex key, and let all the oil in the system drain out. At this point, you can replace the filter, reassemble everything, and add new oil through the designated fill hole.

Watch the video!


by ScegliAuto

More videos