Do it yourself
Frequently asked questions about cars and motorcycles

How to replace the coolant in the Kawasaki Z 650.

Model: Kawasaki Z 650
Part: Antifreeze coolant

Video tutorial

Today, let's go over the instructions on how to replace the engine coolant in the Kawasaki Z 650 motorcycle. First, we place the motorcycle on a stand and start unscrewing the drain screw located at the bottom of the water pump, allowing the fluid to drain into a container for about ten minutes, as shown in the video.

Once the coolant circuit has been completely drained, we will refill it with new antifreeze by unscrewing the radiator cap; fill it until it reaches the maximum level in the coolant reservoir.


Posted on 24 November 2025 by ScegliAuto


Related tutorials

Z 650 To change the engine oil on the Kawasaki Z-650, unscrew the oil drain plug located at the lower left of the bike so that all the used oil can be coll…
Z 650 The fuses on the Kawasaki Z 650 are located inside the designated fuse box installed on the motorcycle. To access it, you will need to loosen the bol…
Z 650 This video provides instructions for removing the fuel tank on a Kawasaki Z 650. First, remove the screws located on the tank's panel using a spanner…

How to Set the Clock on the Kymco Agility?

To adjust the clock on the Kymco Agility, insert the key into the ignition to turn on the dashboard: once it is on, press and hold the button at the bottom left of the dashboard. You will notice that the hours will start to flash, which can be changed by repeatedly pressing the button to the right of the dashboard: once the hours are set, press the button on the left of the dashboard to adjust the minutes in the same way.

Watch the video!


by ScegliAuto

More videos