Do it yourself
Frequently asked questions about cars and motorcycles

How to Remove the Fuel Tank on a Kawasaki Z 650

Model: Kawasaki Z 650
Part:

Video tutorial

This video provides instructions for removing the fuel tank on a Kawasaki Z 650. First, remove the screws located on the tank's panel using a spanner or Torx screwdriver. Once removed, unscrew the additional screws from the side fairings as shown in the video.

Next, remove the rider's seat and unscrew the screws found at the bottom of the tank; then, lift it and disconnect the fuel hose underneath, along with the electrical connector for the fuel level sensor!


Updated on 6 April 2026 by ScegliAuto


Related tutorials

Z 650 In this video tutorial, you will learn how to remove the ECU on a Kawasaki Z 650 by following these simple steps. First, remove the side plastic fair…
Z 650 Today, let's go over the instructions on how to replace the engine coolant in the Kawasaki Z 650 motorcycle. First, we place the motorcycle on a stan…
Z 650 The fuses on the Kawasaki Z 650 are located inside the designated fuse box installed on the motorcycle. To access it, you will need to loosen the bol…

How to replace the transmission oil in the KTM Exc 300

Today, let's discover how to carry out the routine maintenance service by replacing the transmission oil in the two-stroke enduro bike KTM Exc 300. First, place your bike on a stand and start by unscrewing the oil drain bolt located under the engine, allowing the gearbox oil to drain into a container for about ten minutes; then clean the small mesh oil filter, as shown in the video. At this point, unscrew the filler cap and top up with the new gearbox oil, the specifications of which are indicated in the owner's manual!

Watch the video!


by ScegliAuto

More videos