Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to replace the spark plugs on a Kawasaki Z750

Model: Kawasaki Z750
Part: Spark plugs

Video tutorial

Today, learn how to replace the spark plugs on a Kawasaki Z750 independently. Start the replacement by removing the tank and the side fairing of the bike, unscrewing the screws.

Once the tank is removed, you will have free access to the spark plugs. Disconnect all connectors and remove the spark plugs one by one, inserting the new ones while ensuring you do not mix up the numbers, then reconnect the connectors.

Finally, reassemble the tank and the side fairing. Start the engine and test the bike's operation on the road; if it does not start or the warning light remains on, you may have connected one of the spark plugs incorrectly.


Updated on 22 September 2026 by ScegliAuto


Related tutorials

How to Replace the Spark Plugs on the Kawasaki Z750
How to Replace the Spark Plugs on the Kawasaki Z750
Z750 In this brief and simple guide, you will see the steps to remove and replace the engine spark plugs on the Kawasaki Z750. First, place your bike on a…
How to Replace the Alternator Cover of the Kawasaki Z750
How to Replace the Alternator Cover of the Kawasaki Z750
Z750 In this brief and simple guide, you will learn the steps to remove and replace the alternator cover of the Kawasaki Z750 motorcycle, following the in…
How to Replace the Coolant in the Kawasaki Z750
How to Replace the Coolant in the Kawasaki Z750
Z750 Follow the steps below to replace the coolant in the Kawasaki Z750. First, place your bike on a stand and remove the passenger seat, followed by the …

How to Change the Engine Oil on a Yamaha SMAX 150 Scooter?

In this tutorial, see how to change the engine oil on a Yamaha SMAX 150 scooter, a very simple and quick operation. First, ensure the engine is sufficiently cool. Then, position a container underneath the scooter, locate the drain bolt, and loosen it using a 12 mm socket spanner. Allow all the oil in the system to drain out, then remove the oil filter cap and clean it of any residue. At this point, reassemble everything and pour in the new oil through the designated hole.

Watch the video!


by ScegliAuto

More videos