Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Change the Engine Oil of a Kawasaki KX 65?

Model: Kawasaki Kx 65
Part: Engine oil

Video tutorial

To change the engine oil of a Kawasaki KX 65, start by positioning the bike on a flat surface and lifting it with a stand to make it stable. Start the engine and run the bike for a few minutes to warm up the oil, allowing it to flow more easily.

Turn off the engine and remove the oil drain plug on the underside of the engine. Ensure you have a container placed under the drain plug to collect the used oil. Allow the used oil to drain completely.

Replace the drain plug and tighten it securely. Remove the oil filler cap on the right side of the engine and slowly add new oil. Make sure to use the recommended oil for your Kawasaki KX 65 and adhere to the quantity specified in the owner's manual.

Once the new oil is added, replace the filler cap and tighten it securely. Check for any oil leaks.


Updated on 28 September 2026 by ScegliAuto


Related tutorials

How to Change the Engine Oil on a Kawasaki Ninja ZX-6R?
How to Change the Engine Oil on a Kawasaki Ninja ZX-6R?
Ninja Zx 6r To change the engine oil on a Kawasaki Ninja ZX-6R, start by positioning the bike on a flat and stable surface. Next, use the centre stand to lift th…
How to change the motor oil of a Kawasaki Ninja 1000?
How to change the motor oil of a Kawasaki Ninja 1000?
Ninja 1000 Changing the motor oil of a Kawasaki Ninja 1000 requires attention to ensure the correct functioning of the engine. Start by positioning the bike on …
How to change the motor oil of a Kawasaki KX450?
How to change the motor oil of a Kawasaki KX450?
Kx 450f To change the oil in the Kawasaki KX450, start by placing the motorcycle on a stable stand. Remove the oil filler cap and the drain plug at the base …

How to Replace the Exhaust on an Aprilia Sportcity 250

To replace the exhaust on an Aprilia Sportcity 250, loosen the screws that secure the exhaust to its housing: these screws will be located at the bottom and top of the exhaust. Once the support screws are loosened, remove the retaining ring that connects the exhaust to the remaining part of the exhaust pipe. Now, the old exhaust can be completely removed from its housing and replaced with a new spare part; after replacement, check that everything functions correctly.

Watch the video!


by ScegliAuto

More videos