Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Dismantle the Engine of the Keeway Superlight 125

Model: Keeway Superlight 125
Part: Engine

Video tutorial

To dismantle the engine of the Keeway Superlight 125, loosen the screws that secure it to the housing. Then, free it from the intake and exhaust manifolds by disconnecting all the sensor connectors present on the engine.

Once the engine block is completely freed, proceed by loosening the screws that secure the cylinder to the top. This will allow you to detach the piston from the corresponding conrod, gaining access to the crankshaft and all components present at this point.


Updated on 28 October 2026 by ScegliAuto


Related tutorials

How to Start a Keeway Superlight 125
How to Start a Keeway Superlight 125
Superlight 125 Start by sitting on the rider's seat of your Keeway Superlight 125. Next, insert the key into the ignition switch and turn the key to activate the da…
How to Dismantle and Clean the Carburettor of the Keeway Superlight 125
How to Dismantle and Clean the Carburettor of the Keeway Superlight 125
Superlight 125 In today's video tutorial, you will learn how to dismantle and clean the carburettor of the Keeway Superlight 125 motorcycle by following these simpl…
How to Replace the Spark Plug of the Keeway Superlight 125?
How to Replace the Spark Plug of the Keeway Superlight 125?
Superlight 125 To replace the spark plug of the Keeway Superlight 125, disconnect the ignition coil located at the top of the engine block, accessible from the righ…

How to replace the drive belt on the Yamaha Xmax 300

Here are the instructions for removing and replacing the drive belt on the Yamaha Xmax 300 scooter. First, place the scooter on its centre stand and start unscrewing all the screws securing the transmission cover, which are located on the sides; then unscrew the central nut of the fan and subsequently that of the clutch bell, as shown in the video. Once the components are removed, take out and replace the drive belt with a new one; reassemble or replace the entire clutch pack if necessary.

Watch the video!


by ScegliAuto

More videos