Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Exhaust on a Keeway RK2 150?

Model: Keeway Rks 150
Part: Exhaust muffler

Video tutorial

To replace the exhaust on the Keeway RKS 150, loosen the screws securing it at the lower support near the kickstart and at the rear near the mudguard. Once these two screws are removed, you can loosen the two screws that attach the front part of the exhaust to the remaining section of the exhaust pipe.

This will allow you to completely remove the old exhaust from its position, replace it with a new spare part, and check its operation.


Updated on 30 October 2026 by ScegliAuto


Related tutorials

How to Replace the Clutch on the Keeway RKS 150?
How to Replace the Clutch on the Keeway RKS 150?
Rks 150 To replace the clutch on the Keeway RKS 150, you need to loosen the screws that secure the cover located on the right side of the bike, in the centra…
How to Change the Engine Oil of a Keeway RKS 150?
How to Change the Engine Oil of a Keeway RKS 150?
Rks 150 To change the engine oil of a Keeway RKS 150, loosen the drain plug of the oil sump, which is located at the central lower part of the vehicle: once …
How to Change the Engine Oil of the Keeway RKS 150?
How to Change the Engine Oil of the Keeway RKS 150?
Rks 150 To change the engine oil of the Keeway RKS 150, you need to loosen the screw that secures the drain plug of the oil sump, located at the central lowe…

How to Replace the Clutch on a Royal Enfield Bullet 350

To replace the clutch on your Royal Enfield Bullet 350, loosen the screws securing the cover on the left side of the bike, near the kickstarter. Once you have loosened the screws and removed the cover, you will have access to the underlying components, namely the clutch and the variator. Remove the clutch from its housing by unscrewing the screws that hold it in place and sliding out all the discs that comprise it. After removal, insert the new clutch discs into their housing, securing them all with the screws and covering everything with the cover.

Watch the video!


by ScegliAuto

More videos