Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Change the Engine Oil on a Keeway CR 152?

Model: Keeway Cr 152
Part: Engine oil

Video tutorial

To change the engine oil on your Keeway CR 152, first ensure that the motorcycle is on a stable surface and that the engine is slightly warm, which helps the oil flow better. After turning off the engine, place a container under the oil sump to collect the used fluid.

Remove the drain plug located at the bottom of the engine using an appropriate spanner, allowing the old oil to drain completely. Once finished, replace the plug, ensuring it is tightly secured to avoid leaks.

Now you can add the new oil by opening the filler cap, usually located on the top of the engine. Pour the oil slowly, checking the level through the dipstick or the designated sight glass until you reach the recommended amount.

Finally, start the engine for a few minutes and check the oil level again, adding more oil if necessary.


Updated on 4 November 2026 by ScegliAuto


Related tutorials

How to Change the Engine Oil in the Keeway CR 152?
How to Change the Engine Oil in the Keeway CR 152?
Cr 152 In this tutorial, see how to change the engine oil in the Keeway CR 152, a very simple and quick operation. First, ensure the engine is sufficiently …
How to Change the Engine Oil of the Keeway CR 152
How to Change the Engine Oil of the Keeway CR 152
Cr 152 Today, we will change the engine oil and oil filter as part of the routine maintenance for the Keeway CR 152. First, place the motorcycle on the cent…
How do you replace the engine oil of the Keeway CR 152?
How do you replace the engine oil of the Keeway CR 152?
Cr 152 It will be possible to replace the engine oil of the Keeway CR 152 by loosening the drain plug located in the central lower part of the vehicle: once…

How to Remove the Rear Wheel of the Triumph Tiger 800

To remove the rear wheel of the Triumph Tiger 800, loosen the nuts located in the centre of the wheel that secure the central axle to the end of the swingarm. Once these two nuts are removed, unscrew the bolts that secure the rear brake caliper, detaching it from the disc; you will also need to move the chain from the corresponding sprocket. When all these components have been removed, it will be possible to completely detach the wheel, allowing you to insert a new replacement part, reassembling all previously removed components.

Watch the video!


by ScegliAuto

More videos