Do it yourself
Frequently asked questions about cars and motorcycles

Keeway Cr 152 - Videoguide

Keeway Cr 152
How do you replace the headlight bulb of the Keeway CR 152?

In order to replace the headlight bulb of the Keeway CR 152, you need to loosen the screws that secure the motorcycle's headlight, so that the lens of the …read all…
Posted on 6 October 2023 by ScegliAuto
Keeway Cr 152
How do you replace the clutch cable of the Keeway CR 152?

To remove the clutch cable of the Keeway CR 152, you need to loosen the nut located at the end of the cable, just below the left lever of the motorcycle. Once …read all…
Posted on 3 September 2023 by ScegliAuto
Keeway Cr 152
How to change engine oil on Keeway CR 152

Today we replace the engine oil and the oil filter, carrying out the routine maintenance coupon, of the Keeway CR 152 motorcycle. First of all, we put our …read all…
Posted on 30 November 2022 by ScegliAuto
Keeway Cr 152
How to replace the chain, sprocket and rear sprocket on the Keeway CR 152

In this video tutorial we will see how to replace the chain, the sprocket and the sprocket of the Keeway CR 152 motorcycle. First we put our motorcycle on the …read all…
Posted on 21 April 2024 by ScegliAuto
Keeway Cr 152
Oil change on CR 152 Keeway

We recommend the use of 10W-40 lubricant for this model. After warming up the engine well, for at least five minutes, unscrew the hexagonal bolt obviously …read all…
Posted on 28 February 2024 by ScegliAuto
Keeway Cr 152
Engine oil change on Keeway Cr 152

Before changing the oil, it is advisable to switch on and then heat the engine for a few minutes, so that the temperature of the circulating lubricant also …read all…
Posted on 20 February 2024 by ScegliAuto
Keeway Cr 152
Disassembly of the saddle on Keeway CR 152

To remove the left fairing which protects the battery, simply insert the key and turn it, after which this protection will come out of its seat. Using a 10 mm …read all…
Posted on 4 February 2024 by ScegliAuto
(1) Clutch (1) Headlight bulb (1) Engine oil (3) (1)

How to open the Piaggio Beverly saddle with a flat battery

In today's video we see how to open the Piaggio Beverly saddle in case the service battery has run out. First we proceed by opening the compartment on the shield, using the appropriate key. Inside we will find a lever that we will have to pull; at the same time we proceed to unhook the saddle, lifting it. These two operations together, with a little elbow grease, will allow you to open the saddle in cases of extreme need. In fact, we recommend carrying out this operation only if strictly necessary, otherwise it could compromise the correct functioning of the mechanism in the long run.

Watch the video!


by ScegliAuto

More videos