Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Chain, Sprocket, and Crown on the Keeway CR 152

Model: Keeway Cr 152
Part:

Video tutorial

In this video tutorial, you will learn how to replace the chain, crown, and sprocket on the Keeway CR 152 motorcycle. First, place your motorcycle on the centre stand and start by removing the sprocket cover; unscrew the two screws with a 10 mm socket spanner to remove the sprocket, allowing you to subsequently disassemble the chain, as shown in the video.

Next, remove the rear wheel and unscrew the screws of the crown; now replace the components with new ones, using quality spare parts. Proceed to reassemble the transmission elements!


Updated on 13 May 2026 by ScegliAuto


Related tutorials

How to Remove the Chain Guard from a Keeway CR152?
How to Remove the Chain Guard from a Keeway CR152?
Cr 152 To remove the chain guard from a Keeway CR152, start by placing the motorcycle on the centre stand to ensure stability and safety during the work. Lo…
How to Change the Engine Oil in the Keeway CR 152?
How to Change the Engine Oil in the Keeway CR 152?
Cr 152 In this tutorial, see how to change the engine oil in the Keeway CR 152, a very simple and quick operation. First, ensure the engine is sufficiently …
How do you replace the rear shock absorbers of the Keeway CR 152?
How do you replace the rear shock absorbers of the Keeway CR 152?
Cr 152 In order to replace the rear shock absorbers of the Keeway CR 152, you need to loosen the screws that secure these components in the rear of the vehi…

How to Set the Time on a Kymco Super Dink 350 Scooter?

In this tutorial, you will see how to set the time on the Kymco Super Dink 350 scooter, a very simple and quick operation to perform, for example, after disconnecting the battery or following a time change. First, switch on the instrument cluster, then navigate to the "ODO" odometer using the "MODE" button. Next, press and hold both the "MODE" and "FUNC" buttons until the clock starts to flash, then release them. At this point, you can adjust the hour using the "RESET" button, switch to minutes with the "MODE" button, and save the setting by pressing the initial buttons a second time.

Watch the video!


by ScegliAuto

More videos