Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Removing the Seat on Keeway CR 152

Model: Keeway Cr 152
Part:

This video is currently unavailable

To remove the left fairing that protects the battery, simply insert the key and turn it, after which the protection will come out of its seat. Using a 10 mm socket, unscrew the bolt that secures the now accessible fairing.

Move to the right side, and here too, it will be sufficient to unscrew the only bolt present to remove the lower side fairing. Now, still with a 10 mm socket, unscrew the bolts present on both sides (one on each side) and remove the seat.

This way, you can clean the area underneath the seat or the top part of the bike. Reverse the process for reassembly.


Updated on 14 April 2026 by ScegliAuto


Related tutorials

How do you replace the rear shock absorbers of the Keeway CR 152?
How do you replace the rear shock absorbers of the Keeway CR 152?
Cr 152 In order to replace the rear shock absorbers of the Keeway CR 152, you need to loosen the screws that secure these components in the rear of the vehi…
How do you replace the air filter of the Keeway CR 152?
How do you replace the air filter of the Keeway CR 152?
Cr 152 In order to replace the air filter of the Keeway CR 152, you will need to loosen the screws that secure the air filter box and the corresponding inta…
How do you replace the engine oil of the Keeway CR 152?
How do you replace the engine oil of the Keeway CR 152?
Cr 152 The engine oil of the Keeway CR 152 can be completely replaced by unscrewing the drain plug located in the central lower part of the vehicle: once th…

How to Remove the Rear Wheel of the Triumph Tiger 800

To remove the rear wheel of the Triumph Tiger 800, loosen the nuts located in the centre of the wheel that secure the central axle to the end of the swingarm. Once these two nuts are removed, unscrew the bolts that secure the rear brake caliper, detaching it from the disc; you will also need to move the chain from the corresponding sprocket. When all these components have been removed, it will be possible to completely detach the wheel, allowing you to insert a new replacement part, reassembling all previously removed components.

Watch the video!


by ScegliAuto

More videos