Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Model: Keeway Cr 152
Part: Engine oil

The engine oil of the Keeway CR 152 can be completely replaced by unscrewing the drain plug located in the central lower part of the vehicle: once this has been removed, it will be possible to collect the used oil inside a properly positioned container. At this point, the oil filter can also be identified and must be removed from its housing in order to insert the new one: after replacement, the top-up can be carried out. The necessary amount of oil must be inserted through the vent on the right side of the motorcycle, checking its operation.

Posted on 12 July 2025 by ScegliAuto

Video tutorial

Related tutorials

How to replace the engine oil in the Keeway CR 152?
How to replace the engine oil in the Keeway CR 152?
Cr 152 In this tutorial, we can see how to replace the motor oil in the Keeway CR 152, an extremely simple and quick operation. First of all, make sure that…
How to Change the Engine Oil of the Keeway CR 152
How to Change the Engine Oil of the Keeway CR 152
Cr 152 Today, we will change the engine oil and oil filter as part of the routine maintenance for the Keeway CR 152. First, place the motorcycle on the cent…
How to replace the motor oil in the Keeway CR 152?
How to replace the motor oil in the Keeway CR 152?
Cr 152 In this tutorial we can see how to replace the engine oil in the Keeway CR 152, an extremely simple and fast operation. First of all, make sure that …

How to Replace the Spark Plug on a Piaggio Vespa SXL 125 Scooter?

In this tutorial, you will see how to replace the spark plug on a Piaggio Vespa SXL 125 scooter, a very simple and quick operation. Before proceeding, ensure that the key is not inserted for safety. Start by unscrewing the indicated screw and opening the small lower door, then disconnect the connector from the spark plug and begin unscrewing it using a long 16 mm socket. Once completely removed, insert the replacement and tighten it without applying excessive force, as it could be damaged. Finally, reconnect the connector and reposition the door.

Watch the video!


by ScegliAuto

More videos