Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Coolant in the Piaggio X9 125

Model: Piaggio X9 125
Part: Antifreeze coolant

Video tutorial

Today's procedure will show you how to drain and refill the engine coolant of the Piaggio X9 125 scooter in simple steps. First, place the scooter on its centre stand and start unscrewing the screws securing the water pump cover; let the fluid drain into a container for about ten minutes.

At this point, reassemble the water pump and unscrew the radiator filler cap; then refill with the new antifreeze suitable for your radiator, starting the engine and topping up if necessary!


Updated on 17 August 2026 by ScegliAuto


Related tutorials

Resetting the service light on the Piaggio X9 125
Resetting the service light on the Piaggio X9 125
X9 125 These brief instructions will allow you to reset the service light for the regular maintenance oil change of the Piaggio X9 125 scooter. First, place…

How to Set the Clock on the Yamaha Xmax 300?

On the Yamaha Xmax 300, you can adjust the clock by turning on the instrument panel, inserting the key into the ignition switch. Once the panel is powered, press and hold the button located on the right side of the handlebars, just below the red button. You will notice the hours start to flash, and you can change them by repeatedly pressing the same button. After a few seconds, the minutes will also start to flash, which can be adjusted using the same method.

Watch the video!


by ScegliAuto

More videos