Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Reset the Oil Change Light on a Suzuki V-Strom 250

Model: Suzuki V Strom 250
Part: Warning light – error code

Video tutorial

To reset the Oil Change light on a Suzuki V-Strom 250, press and hold the SEL button located at the bottom left of the instrument panel. While holding this button, insert the ignition key into the ignition switch and turn it. You will notice the Oil Change light start to flash, and you can release the button once the light goes out completely.

Once the light has been reset, turn off the instrument panel by turning the key.


Updated on 17 August 2026 by ScegliAuto


Related tutorials

How do you reset the Service light on the Suzuki V-Strom 250?
How do you reset the Service light on the Suzuki V-Strom 250?
V Strom 250 .. order to reset the Service light of the Suzuki V-Strom 250, you need to press and hold the SEL button located on the bottom left side of the dashboard.. …
How to replace the engine oil in the Suzuki V-Strom 250 SX?
How to replace the engine oil in the Suzuki V-Strom 250 SX?
V Strom 250 .. how to replace the engine oil in the Suzuki V-Strom 250 SX, a very simple and quick operation. First of all, make sure that the engine is cold enough,.. …
How to Change the Engine Oil in the Suzuki V-Strom 250 SX?
How to Change the Engine Oil in the Suzuki V-Strom 250 SX?
V Strom 250 .. see how to change the engine oil in the Suzuki V-Strom 250 SX, a very simple and quick operation. First, ensure that the engine is cool enough to operate.. …

How to Set the Time on a Kymco Super Dink 350 Scooter?

In this tutorial, you will see how to set the time on the Kymco Super Dink 350 scooter, a very simple and quick operation to perform, for example, after disconnecting the battery or following a time change. First, switch on the instrument cluster, then navigate to the "ODO" odometer using the "MODE" button. Next, press and hold both the "MODE" and "FUNC" buttons until the clock starts to flash, then release them. At this point, you can adjust the hour using the "RESET" button, switch to minutes with the "MODE" button, and save the setting by pressing the initial buttons a second time.

Watch the video!


by ScegliAuto

More videos