Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to replace the engine oil in the Suzuki V-Strom 250 SX?

Model: Suzuki V Strom 250
Part: Engine oil

Video tutorial

In this tutorial, we can see how to replace the engine oil in the Suzuki V-Strom 250 SX, a very simple and quick operation. First of all, make sure that the engine is cold enough, then place a container under the motorcycle, locate the drainage hole bolt and unscrew it using a 14mm socket wrench.

Let all the oil in the system drain out, open the filter cap with an 8mm wrench and insert the replacement. At this point, all that's left to do is put everything back together and add the necessary amount of oil through the designated upper hole.


Posted on 23 April 2025 by ScegliAuto


Related tutorials

How to Change the Engine Oil in the Suzuki V-Strom 250 SX?
How to Change the Engine Oil in the Suzuki V-Strom 250 SX?
V Strom 250 .. see how to change the engine oil in the Suzuki V-Strom 250 SX, a very simple and quick operation. First, ensure that the engine is cool enough to operate.. …
How to Remove the Engine from a Suzuki V-Strom 250
How to Remove the Engine from a Suzuki V-Strom 250
V Strom 250 To remove the engine from a Suzuki V-Strom 250, you need to loosen the bolts securing the cylinder head to its housing, removing it along with the va…
How do you reset the Service light on the Suzuki V-Strom 250?
How do you reset the Service light on the Suzuki V-Strom 250?
V Strom 250 In order to reset the Service light of the Suzuki V-Strom 250, you need to press and hold the SEL button located on the bottom left side of the dashb…

How to replace the transmission oil in the KTM Exc 300

Today, let's discover how to carry out the routine maintenance service by replacing the transmission oil in the two-stroke enduro bike KTM Exc 300. First, place your bike on a stand and start by unscrewing the oil drain bolt located under the engine, allowing the gearbox oil to drain into a container for about ten minutes; then clean the small mesh oil filter, as shown in the video. At this point, unscrew the filler cap and top up with the new gearbox oil, the specifications of which are indicated in the owner's manual!

Watch the video!


by ScegliAuto

More videos