Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Remove the Engine from a Suzuki V-Strom 250

Model: Suzuki V Strom 250
Part: Engine

Video tutorial

To remove the engine from a Suzuki V-Strom 250, you need to loosen the bolts securing the cylinder head to its housing, removing it along with the valve cover. Once these components are removed, you can locate the pistons inside, which must be detached from their corresponding connecting rods.

You can then access other internal components of the engine, which can be replaced with new spare parts if necessary. At the end of the operation, you can reinsert the engine into its housing.


Updated on 15 October 2026 by ScegliAuto


Related tutorials

How to replace the engine oil in the Suzuki V-Strom 250 SX?
How to replace the engine oil in the Suzuki V-Strom 250 SX?
V Strom 250 .. how to replace the engine oil in the Suzuki V-Strom 250 SX, a very simple and quick operation. First of all, make sure that the engine is cold enough,.. …
How to Change the Engine Oil in the Suzuki V-Strom 250 SX?
How to Change the Engine Oil in the Suzuki V-Strom 250 SX?
V Strom 250 .. see how to change the engine oil in the Suzuki V-Strom 250 SX, a very simple and quick operation. First, ensure that the engine is cool enough to operate.. …
How do you reset the Service light on the Suzuki V-Strom 250?
How do you reset the Service light on the Suzuki V-Strom 250?
V Strom 250 .. order to reset the Service light of the Suzuki V-Strom 250, you need to press and hold the SEL button located on the bottom left side of the dashboard.. …

How to replace the transmission oil in the KTM Exc 300

Today, let's discover how to carry out the routine maintenance service by replacing the transmission oil in the two-stroke enduro bike KTM Exc 300. First, place your bike on a stand and start by unscrewing the oil drain bolt located under the engine, allowing the gearbox oil to drain into a container for about ten minutes; then clean the small mesh oil filter, as shown in the video. At this point, unscrew the filler cap and top up with the new gearbox oil, the specifications of which are indicated in the owner's manual!

Watch the video!


by ScegliAuto

More videos