Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions
In this tutorial, you will see the main instructions to reset the control unit on a Keeway RKV 125, as well as on other models from the same manufacturer, in simple steps. First, fully open the throttle. While keeping the throttle fully open, turn on the ignition of your vehicle, then turn it off and on three times, as shown in the video. At this point, release the throttle, and you will have successfully reset your control unit!

Updated on 5 April 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Replace the Exhaust of the Keeway RKV 125?
How to Replace the Exhaust of the Keeway RKV 125?
Rkv 125 To replace the exhaust of the Keeway RKV 125, loosen the screws securing it to its housing on the right side of the bike near the rear wheel. Once th…
How to Replace the Battery in the Keeway RKV 125?
Rkv 125 To replace the battery in the Keeway RKV 125, loosen the bolts securing the triangular panel on the right side of the bike, just below the seat. Once…
How do you replace the battery of the Keeway RKV 125?
How do you replace the battery of the Keeway RKV 125?
Rkv 125 In order to replace the battery of the Keeway RKV 125, you will need to loosen the screws that secure the seat from the rear and side parts of its ho…

How to Dismantle the TM Racing KZ10C Engine?

To dismantle the TM Racing KZ10C engine, first remove it from its housing by unscrewing the screws that secure it to the respective supports and disconnecting all cables. Once the block is freed, loosen the screws that secure the cylinder so it can be removed from the top; after removal, unscrew the screws that secure the two side casings, removing these as well to access the additional components inside the engine. After replacing the affected parts, close the engine by securing the casings again.

Watch the video!


by ScegliAuto

More videos