Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Change the Engine Oil on the Keeway Kblade 125

Model: Keeway Kblade 125
Part: Engine oil

Video tutorial

In this video tutorial, you will learn how to change the engine oil, performing the regular maintenance service, on the Keeway Kblade 125 scooter. First, position your scooter on the centre stand and start unscrewing the oil drain bolt located under the engine using a star socket, allowing the old oil to drain into a container for about ten minutes.

At this point, screw the drain plug back in and open the fill hole, pouring in the new oil until it reaches the maximum level, following the video tutorial until the end!


Updated on 28 April 2026 by ScegliAuto


Related tutorials

How to Change the Engine Oil on the Keeway KBlade 125
How to Change the Engine Oil on the Keeway KBlade 125
Kblade 125 In today's video tutorial, you will learn how to change the oil during the regular maintenance service on a Keeway KBlade 125 scooter. First, positio…
How to Change the Engine Oil and Gearbox Oil of the Keeway Kblade 125
How to Change the Engine Oil and Gearbox Oil of the Keeway Kblade 125
Kblade 125 This brief and simple guide shows how to perform the routine maintenance service on the Keeway Kblade 125 scooter. First, place your scooter on the c…
How to Replace the Air Filter on the Keeway K-Blade 125?
How to Replace the Air Filter on the Keeway K-Blade 125?
Kblade 125 To replace the air filter on the Keeway K-Blade 125, loosen the screws securing the cover that contains the air filter, located on the right side of …

How to Remove the Rear Wheel of the Triumph Tiger 800

To remove the rear wheel of the Triumph Tiger 800, loosen the nuts located in the centre of the wheel that secure the central axle to the end of the swingarm. Once these two nuts are removed, unscrew the bolts that secure the rear brake caliper, detaching it from the disc; you will also need to move the chain from the corresponding sprocket. When all these components have been removed, it will be possible to completely detach the wheel, allowing you to insert a new replacement part, reassembling all previously removed components.

Watch the video!


by ScegliAuto

More videos