Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions
This brief and simple guide shows how to perform the routine maintenance service on the Keeway Kblade 125 scooter. First, place your scooter on the centre stand and start by unscrewing the oil drain screw for the gearbox, located under the transmission cover (on the left); then unscrew the fill bolt and top up. Similarly, unscrew the engine oil drain bolt, allowing it to drain into a container for about ten minutes; unscrew the fill cap and top up, checking the oil level!

Updated on 30 May 2026 by ScegliAuto

Video tutorial

Related tutorials

Change the Engine Oil on the Keeway Kblade 125
Change the Engine Oil on the Keeway Kblade 125
Kblade 125 In this video tutorial, you will learn how to change the engine oil, performing the regular maintenance service, on the Keeway Kblade 125 scooter. Fi…
How to Change the Engine Oil on the Keeway KBlade 125
How to Change the Engine Oil on the Keeway KBlade 125
Kblade 125 In today's video tutorial, you will learn how to change the oil during the regular maintenance service on a Keeway KBlade 125 scooter. First, positio…
How to Replace the Air Filter on the Keeway K-Blade 125?
Kblade 125 To replace the air filter on the Keeway K-Blade 125, loosen the bolts securing the cover near the rear wheel, just above the clutch cover. Once the c…

What Does the V-Belt Light Indicate on a Yamaha NMAX Scooter and How to Remove It?

If the V-BELT light has illuminated on the instrument cluster of your Yamaha NMAX scooter, it means it is time to replace the drive belt as it has exceeded the relevant interval. You can entrust this maintenance task to your trusted workshop; the cost will not be particularly excessive. Once this is done, you can manually reset the light by following the procedure shown in this tutorial. First, turn on the instrument cluster, then repeatedly press the left button on the dashboard to reach the service interval in question. At this point, press and hold the right button once to initialise the reset, and a second time to complete it.

Watch the video!


by ScegliAuto

More videos