Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions
Before starting, position your Keeway Cafe Racer 152 upright using a motorcycle stand, then start and run the engine for a few minutes. Begin by placing a container underneath the lower oil drain nut, then unscrew it to let the engine oil drain out. Once the engine oil has completely drained, re-screw the lower nut, then unscrew and remove the upper refill cap. At this point, insert the new engine oil, and finally, re-screw the refill nut, and the replacement will be complete.

Updated on 5 May 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Change the Engine Oil on a Keeway Cafe Racer 152
How to Change the Engine Oil on a Keeway Cafe Racer 152
Cafe Racer 152 Let’s discover how to perform the routine maintenance oil change on the Keeway Cafe Racer 152 by following the instructions below. First, place the b…
Change Engine Oil and Oil Filter on Keeway Cafe Racer 152
Change Engine Oil and Oil Filter on Keeway Cafe Racer 152
Cafe Racer 152 This guide explains how to perform routine maintenance by changing the engine oil and oil filter on the Keeway Cafe Racer 152. First, place the bike …
How to Change the Engine Oil on a Keeway Cafe Racer 152
How to Change the Engine Oil on a Keeway Cafe Racer 152
Cafe Racer 152 In this brief guide, we will see how to change the engine oil on the Keeway Cafe Racer 152, following the instructions below. First, place your motor…

How to Remove the Handlebar Ends and Mirrors on the Royal Enfield Interceptor 650

This guide shows how to remove the handlebar ends and replace the mirrors on the Royal Enfield Interceptor 650. The first step is to unscrew the bolt holding the handlebar end in place using an Allen key. Once the bolt is removed, carefully pull out the finishing block. Take the replacement finishing block and, after loosening the fixing hex bolt, insert it into position and tighten it. Install the mirrors at the end of the element and tighten the mirror fixing bolt. Make the necessary adjustments to ensure proper rear visibility.

Watch the video!


by ScegliAuto

More videos