|
Do it yourself
| |||
| ||||
Model: Keeway Txm 125
To change the engine oil of the Keeway TXM 125, loosen the drain plug located at the central lower part of the bike. Once removed, collect the oil in a container until it is completely drained. Next, unscrew the side screws that secure the oil filter cover on the right side of the bike; this will allow you to remove the filter inside and replace it with a new one, topping up the oil through the designated breather.
Updated on 27 May 2026 by ScegliAuto
Video tutorial
Related tutorials
Txm 125
To replace the exhaust on the Keeway TXM 125, remove the side plastics of the bike by loosening the three screws that secure them. Once the plastics …
Txm 125
To replace the muffler of the Keeway TXM 125, you will need to loosen the screws that secure the exhaust tip to its housing: this will be located at …
Txm 125
You can replace the exhaust on a Keeway TXM 125 by loosening the screws that secure the exhaust terminal to its housing: you will also need to unscre…
|
How to Replace the Key Battery on a BMW R1250GSA
To replace the key battery on your BMW R 1250 GSA, start by locating the opening slot on the key. Once you have found the slot, use a small screwdriver or a coin to carefully pry open the key. Find the existing battery and remove it carefully. Ensure you insert the new battery with the correct polarity. Close the key securely and check that it is properly sealed. Finally, test the key to ensure it works correctly. If in doubt, consult the owner's manual for detailed instructions. by ScegliAuto More videos
|
|
For advertising on this site Write to info@scegliauto.com
ScegliAuto is not responsible for any inaccuracy of the data in the lists. To report any inaccuracy or your business (if you own the business in question), please write to info@scegliauto.com
Number of seconds to generate the page: 0.570
(c) ScegliAuto 2026 - info@scegliauto.com - Privacy policy VAT number: IT01247470535 |
