Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Model: Keeway Rkf 125
Part: Engine oil

To change the engine oil of the Keeway RKF 125, first unscrew the oil drain plug located at the bottom of the bike, in the central area. Position a container under the bike to collect the used oil until it has completely drained. After removing the old oil, top up by pouring new oil through the side cap: it is recommended to use 10W-40 oil. Once the top-up is complete, close the engine oil reservoir cap.

Updated on 8 June 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Change the Engine Oil on a Keeway RKF 125?
How to Change the Engine Oil on a Keeway RKF 125?
Rkf 125 You can change the engine oil on a Keeway RKF 125 by loosening the drain plug located at the bottom centre of the bike: once the plug is removed, all…
How to change the engine oil and oil filter on the Keeway RKF 125
How to change the engine oil and oil filter on the Keeway RKF 125
Rkf 125 This guide provides instructions for performing the routine maintenance service of changing the engine oil and oil filter on the Keeway RKF 125 motor…
Engine oil and oil filter replacement for the Keeway RKF 125
Engine oil and oil filter replacement for the Keeway RKF 125
Rkf 125 Learn how to perform routine maintenance by replacing the engine oil and oil filter on the Keeway RKF 125. First, unscrew the oil drain bolt located …

How to Reset the Engine Oil Light on a Yamaha XMax 250

This short video demonstrates the procedure to reset the engine oil light on a Yamaha XMax 250 scooter. The operation is very simple and quick; first, insert the motorcycle key into the designated slot and turn it to the first position to power on the instrument panel without starting the vehicle. At this point, you will see the light on the display; simply press the "oil change" button located at the centre of the motorcycle's speedometer and hold it until the light stops flashing. The operation will then be complete; to verify success, turn off and then turn on the instrument panel.

Watch the video!


by ScegliAuto

More videos