Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Change the Engine Oil and Oil Filter on the Keeway Superlight

Model: Keeway Superlight
Part: Engine oil

Video tutorial

This guide will show you how to carry out the routine maintenance service by changing the engine oil and oil filter on the Keeway Superlight motorcycle. First, place the motorcycle on its centre stand and start unscrewing the oil drain bolt located under the engine, allowing it to drain into a container for about ten minutes; then unscrew the screws of the oil filter cover, located on the right, removing and replacing the filter cartridge with a new one. Finally, unscrew the filler cap to top up, pouring in 10W40 synthetic oil.


Updated on 21 July 2026 by ScegliAuto


Related tutorials

Engine Oil Change on Keeway Superlight 125
Engine Oil Change on Keeway Superlight 125
Superlight Start the engine for a few minutes to warm the oil, making it less viscous and facilitating its subsequent removal. Using a 17 mm spanner, unscrew th…
How do you replace the air filter of the Keeway Superlight?
How do you replace the air filter of the Keeway Superlight?
Superlight In order to replace the air filter of the Keeway Superlight, you will need to loosen the screws that secure the cover of the filter box to its housin…
How to Replace the Air Filter of the Keeway Superlight?
How to Replace the Air Filter of the Keeway Superlight?
Superlight To replace the air filter of the Keeway Superlight, loosen the screws securing the triangular cover located just under the seat on the right side of …

How to Remove the Rear Wheel of the Triumph Tiger 800

To remove the rear wheel of the Triumph Tiger 800, loosen the nuts located in the centre of the wheel that secure the central axle to the end of the swingarm. Once these two nuts are removed, unscrew the bolts that secure the rear brake caliper, detaching it from the disc; you will also need to move the chain from the corresponding sprocket. When all these components have been removed, it will be possible to completely detach the wheel, allowing you to insert a new replacement part, reassembling all previously removed components.

Watch the video!


by ScegliAuto

More videos